• Sachets, liners and tray fit
  • Artwork and retail pack reviews
  • Sample and transport checks

Reviewing a strip of detachable patch sachets

Linked sachets can keep several individual units together until the buyer tears one away. The separation line and the opening line do different jobs and should be identifiable on the approval drawing.

Draw two independent operations

Mark where the strip breaks into individual units and where each unit opens to reveal its patch. Add the direction the consumer is expected to pull. Ask the supplier how much of the seal remains on both neighbouring sachets after separation under the proposed design.

Try the complete strip

Handle the strip as it will be removed from its carton. Separate the first unit, then one from the middle, using the intended grip. Inspect the adjacent packs for edge damage, torn print or seals disturbed by the movement. Keep the used strip with the original unit count recorded.

Check each detached unit

Place a single separated sachet on the table. Confirm the tear feature can be found and any information needed at that stage remains legible. Review loose units as well as a complete strip in the sampling and packing brief. Final suitability depends on the actual material, seal design and finished-pack assessment.

Frequently asked questions

What evidence should accompany a strip sample?

Ask for the drawing with both tear paths, a filled strip, a sample after detachment and the supplier's proposed review of the seals around the individual units.

References

Share this requirement with our team

Share the patch count per pack, the preferred pack format and where you are in artwork approval.