• Sachets, liners and tray fit
  • Artwork and retail pack reviews
  • Sample and transport checks

Mounting a patch sachet on a sampling card

A sampling card combines an individually packed patch with space for branding or a retail demonstration. The way the sachet is attached determines whether the customer can remove it cleanly and still find the instructions.

Write down the delivery format

Specify whether the card will be handed out, inserted into a mailer or attached to another product. Include the actual filled sachet dimensions and its opening edge. Reserve a place for the customer's fingers so removing the sachet does not require pulling directly on its seal.

Try a mounted physical sample

Compare a pocket, slot or other proposed method with the brand's preferred appearance. Lift the pack and look for tears, residue, bent corners and covered markings. Ask the converter to confirm compatibility of any attachment material with the sachet finish. Check it again after the assembled card is packed in a stack.

Assign information to the right component

Lay the detached sachet beside the empty card. Identify which instructions and identifiers travel with the sample after separation. Have the responsible team review the wording for the destination market and the way the sample will be distributed. Retain both pieces for final artwork approval.

Frequently asked questions

Can we approve the card before ordering the sachet?

Approve a layout direction early if needed. Finalise the attachment position and printed information after checking a filled sachet made to the intended dimensions and opening configuration.

References

Share this requirement with our team

Share the patch count per pack, the preferred pack format and where you are in artwork approval.