• Sachets, liners and tray fit
  • Artwork and retail pack reviews
  • Sample and transport checks

Sachet seal geometry for cosmetic patch primary packaging

The pouch drawing should show where the seal, patch and tear feature sit relative to one another. Use the finished dimensions of every piece inside.

Draw the usable area clearly

Mark the outer cut, seal area, intended filling direction and grip space. For very small packs, a few millimeters around the edges can change how the user pulls the part out.

Ask the packaging supplier to check that the largest planned liner or tray remains clear of the seal in the normal loading orientation. Note which direction the widths were measured.

Treat corners and intersections as review points

Inspect the prototype at each seal intersection and around the feature used to open it. Include both a straight-on view and an angled view to help spot folds or trapped material.

Keep design elements requiring readable print clear of seams and folds. Ask the pack supplier to mark areas where layout tolerance could cause artwork or inserts to cross the intended boundary.

Define the acceptance evidence

Draw the critical seal dimension and state which visual checks must be made on filled units. If the project needs force or integrity data, agree on a suitable method with the testing partner.

Preserve approved drawings and filled examples at the same version so the engineering and design teams can refer to the same seal geometry.

  • Internal space and outer edge marked separately
  • Alignment of seal and filled assembly
  • Agreed seal checks for the filled prototype

Frequently asked questions

Which seal shape works for a flat skincare patch pouch?

Review seam geometry with the insert dimensions, filling orientation and expected opening. The preferred construction needs to work as a packed unit.

References

Share this requirement with our team

Share the patch count per pack, the preferred pack format and where you are in artwork approval.