• Sachets, liners and tray fit
  • Artwork and retail pack reviews
  • Sample and transport checks

Testing an applied label on a stock patch pouch

A short launch run may use a stock sachet with a separately printed label. Before approving its appearance, check how the label behaves when the pouch is filled, handled and opened.

Plain silver foil pouch with a sealed border and side notches
Unprinted foil pouch shown in the eye patch product handbook.

Choose the placement on a filled unit

Mark the proposed label area on the finished sachet. Keep the code, opening aid and seal inspection areas identifiable. Flex the pouch gently as a customer would to reveal any parts of the label that sit over a ridge, a cavity or a change in surface angle.

Trial the actual label stock

Tell the label supplier which pouch face and surface finish it must adhere to. Obtain a sample on the intended face material with the intended adhesive and print finish. Inspect edge lift, wrinkles and the legibility of type after the planned handling and storage review.

Include the application step

State who applies the label, which reference locates it and how orientation is checked. Compare placement across several units from a trial. If the brand later moves to printed film, preserve the wording and visual elements separately from the label dimensions so artwork can be adapted to the new pack.

Frequently asked questions

Is a flat label proof enough to approve a stock pouch?

It can establish wording and layout. Use a filled, labelled pouch to evaluate adhesion, positioning, handling and the customer's ability to open the finished presentation.

References

Share this requirement with our team

Share the patch count per pack, the preferred pack format and where you are in artwork approval.