• Sachets, liners and tray fit
  • Artwork and retail pack reviews
  • Sample and transport checks

Checking how nested trays separate during packing

A stack of formed trays can fit neatly in storage and still be hard to separate at the packing bench. A denesting review checks how trays are supplied to operators or picked by the intended equipment.

Describe the receiving setup

Record whether trays will be separated by hand or loaded into a feeder. Ask for the stack orientation, packing quantity and handling instructions expected by the receiving team. Include any protective outer bag or sleeve that remains in place until the stack goes into use.

Observe consecutive picks

Work from the top, middle and end of a representative stack. Note double picks, trays that cling together and rims that distort during separation. Photograph the contact points before bending them back. Preserve the delivery orientation so the supplier can connect observations to the nesting geometry.

Review the effect on the filled tray

Place the patch and cover into a tray that was difficult to separate. Check whether deformed corners affect seating, closure or the clearance above the sample. Keep stack handling and filled-tray fit as separate observations in the same trial, with the tray drawing and material version attached.

Frequently asked questions

Is a single loose tray sufficient for approval?

It can show cavity dimensions and presentation. Request a representative stack when the purchase decision also covers separation, feeding or the way trays travel to the packing site.

References

Share this requirement with our team

Share the patch count per pack, the preferred pack format and where you are in artwork approval.