Size the filled assembly
Use the actual stack of primary packs, including production tolerances, seal edges and any folded insert. A stack of empty sachets can leave more room in the prototype than the filled units will have.
Include the paperboard thickness and closure features on the sample drawing. A tight front-to-back dimension can crowd a leaflet or distort the front graphic.
Check the shelf and opening experience
Inspect how the assembled carton stands and how the first sachet emerges from the expected opening. An upright insert may predictably face the consumer, while a loose one can turn around during transport.
Look at flaps, corners and high-contact areas after representative handling. If the pouch can be accidentally cut while opening the carton, have the structure checked early.
Approve carton and primary pack together
Use the final filled count, art revision and orientation in the sample. Ask which measurements are retained as purchasing and incoming check references.
Confirm that updates to the sachet thickness or size trigger a carton-fit check. The two pieces share a specification even when purchased from separate suppliers.
- Filled primary packs and leaflet stack
- Panel and closure check
- Approved carton revision linked to sachet
Frequently asked questions
Can retail carton dimensions be set before the pouch is final?
Use provisional dimensions during concept work. Approve the final carton with the actual filled primary pack and full unit count.